MOLYKOTE 106

Molykote  106

Descripción – Lubricante seco de curado en caliente.

Aplicaciones – Revestimiento de combinaciones metal/metal; Lubricación permanente, libre

                            de mantenimiento con esfuerzos de fricción altos a bajas velocidades o movimientos oscilantes;

                             Utilizado donde el dise o de la construcción previene del uso de aceite o grasa, o donde no

                             se admite un posible ensuciamiento; Este producto se emplea con éxito en la lubricación de

                            cerraduras, bisagras, armaduras magnéticas y para el revestimiento antigripaje de componentes

                            de máquinas y engranajes.

 Características – Bajo coeficiente de fricción; Alta capacidad de soporte de carga;

                                Buena adherencia; Admite el sobrepintado.

 Composición – Lubricantes sólidos; Resina orgánica; Disolventes.

  Rango de temperaturas – Desde -70 hasta +250 C

  Envases – Cubo: 5kg

Features & benefits
• Low coefficient of friction
• High load-carrying capacity
• Good adhesion
• No intentional polytetrafluoroethylene (PTFE) or per- and
polyfluoroalkyl substances (PFAS)

Composition

• Solid lubricants

• Organic binder

• Solvent

Applications

Used as dry lubrication for metal/metal combinations. Provides maintenance-free, permanent lubrication of highly stressed friction combinations with low speeds or oscillating operation. Used where design construction prevents the use of oil or grease or where the risk of soiling is undesirable. Can be used for the dry lubrication of locks, hinges, joints, magnetic armatures and for the anti-seizure coating of engine and gear components

Description

MOLYKOTE® 106 Anti-Friction Coating is a heat-curing coating that offers long-lasting high-load-carrying capacity and low coefficient of friction.

How to use

Surface preparation First, clean and degrease the surface that will be coated with MOLYKOTE® 106 Anti-Friction Coating. Phosphating or sandblasting (180 grid) increases the adhesion and service life.

How to apply

Stir MOLYKOTE® 106 Anti-Friction Coating thoroughly before applying by spraying, dipping, centrifuging or brushing. Recommended dry-film thickness: 5 to 20 µm.

Curing

60 minutes at 150°C (object temperature). 30 minutes at 180°C (object temperature).

Typical properties

Specification writers: These values are not intended for use in preparing specifications. Please contact your local MOLYKOTE® sales representative prior to writing specifications on this product.

Standard(1) Test Unit Result Color Dark gray DIN EN ISO 2431

Viscosity at 20°C (ISO4 cup) s 37 DIN 53217/2

Density at 20°C g/ml 1.16 DIN ISO 2619

Flash point °C 29.5 Curing time at 150°C minutes 60

Curing time at 180°C minutes 30

Service temperature range °C -70 to 250

Solubility Thinning can be carried out using MOLYKOTE® L 13 Thinner.

Handling precautions PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED IN THIS DOCUMENT. BEFORE HANDLING, READ SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION.

Usable life and storage
When stored between 0 and 40°C in the original unopened
containers, MOLYKOTE® 106 Anti-Friction Coating has a usable
life of 36 months from the date of production.

NATO S-1738 / MIL L-8937 A+B / ZX 34 / DEF-STAN 91-19/1 / AFS 276