High load carrying capacity
Excellent adhesion to metals
Low coefficient of friction
High resistance to oils and fuels
Good corrosion protection
Meets requirements of SAE AS 5272 type I & II, SAE AS 1701 Class I, MIL-L-46010D type I & II, PWA 474 COMPOSITION
Heat curing dry film lubricant for metal/metal material pairings involving slow to medium-fast movements and medium to heavy loads.
Suitable for permanent lubrication, with simultaneous corrosion protection of friction contacts involving high loads and low speed.
Used wherever oils or greases cannot be used for technical reasons or are undesirable because of the risk of soiling.
Suitable for aviation applications where a performance according to SAE AS 1701 Class I, SAE AS 5272 type I & II, Pratt & Whitney PWA 474 (final approval pending) and MIL-L-46010D (type I & II) is required. It is recommended to customers to run specific testing on original components before setting specifications. TYPICAL PROPERTIES Specification Writers: These values are not intended for use in preparing specifications.
Standard Property Unit Result Color Dark gray Service temperature range ºC -200/+260 °F -328/+500 Physical Properties ASTM-D 1475 Density at 23°C (73°F) g/ml 1.1 EN ISO DIN 2431
Viscosity, cup # 3 at 23°C (73°F) s 38 ASTM-D 56
Flash point °C 10 °F 50 Load carrying capacity, wear protection, service life ASTM-D 2714 LFW-1, rotating, load 2860 N, n=72 rpm, v=7.9 m/min, no. of revolutions to μ=0.1 p=158000(1) ASTM-D 2714 LFW-1, oscillating, load 900 N, frequency= 89.5 osc./min., no. of oscillations to μ=0.08 p=140000(1) ASTM-D 2625 Falex, procedure B, load carrying capacity N lbf p=20000(1) p=4500(1) ASTM-D 2625 Falex, procedure A, endurance life average at 4450 N load Min. p > 450(1) Resistances ASTM-B 117 DIN 50021 Corrosion resistance without red rust (steel substrate, spraying application, film thickness = 10 µm) h p= min 100(2) ASTM-D 2510 Fluid resistance against typical aviation fluids, Proc. C (3) no adhesion loss ASTM-D 2510 Film adhesion, Proc A no adhesion loss ASTM: American Society for Testing and Materials. DIN: Deutsche Industrie Norm. (1) p= surface pre-treatment = Mn-phosphating (2) p= surface pre-treatment = Zn-phosphating (3) list of tested aviation fluids is available upon request